Ballistics Technology International (BTI) manufactures and supplies SACON® shock and bullet abosrbing concrete.

Project Samples

Dam Neck Protective Wall

Dam Neck Protective Wall Assembly
Protective Walls Give  30,000 sq-ft of Additional Training Space BTI’s Protective Wall design was employed for the Navy on their Dam Neck Range, Virginia Beach, VA. Two walls – one 290-ft long and the other 324-ft long – were erected to separate a firing range into three lanes. The 16-ft walls were made with steel uprights and BTI’s SACON bullet absorbing concrete wall sections. The 2’x6’ SACON sections a...

Grenadier Gunnery Facade

Early Stages of Gunnery Facade
Grenadier Gunnery Façade in SACON BTI supplied and erected a two-story façade in SACON bullet absorbing concrete at the Marine Corps Base, Quantico Virginia. The façade on the MOUT Assault Course on the base replaced a worn wooden structure. BTI’s design provided a mesh steel deck for the target placement on the second story of the facility. On the range the façade is being used both by the snipers firing from ...

Grenade Shoot House

Grenade Shoothouse Assembly - Okinawa
Grenade Shoot House for Marines in Okinawa BTI just completed in the installation of one of its grenade shoot house designs at Camp Hansen, Okinawa for the Marine Corps. The facility has a grenade room and two clearing rooms. The facility is part of a grenade training complex on the base where trainees start learning basic grenade handling and throwing, and then move up to the urban setting of the grenade shoot house.